Our Capabilities

Engineering Services

From concept design to retrofit engineering, our core disciplines cover the entire vessel lifecycle.

Core design disciplines

Detailed capability pages for the design and engineering work we are most often approached for.

Ship Design

Concept to class-approved newbuild design for tankers, cargo vessels and offshore units.

Explore →

Vessel Design

Barges, tugs, workboats and offshore support craft built around the operation.

Explore →

Boat Design

Crew boats, patrol craft, aluminium workboats, yachts and houseboats.

Explore →

Ship Structural Design

Scantlings, reinforcement, foundations and direct strength assessment.

Explore →

Conversion Engineering

Bitumen conversions, BWTS and scrubber retrofits, deck strengthening.

Explore →

Naval Architecture

Stability booklets, hydrostatics, load line, tonnage and loadicators.

Explore →

Oil-to-Bitumen Conversion

Thermal oil systems, insulation, structure and stability — 15+ projects delivered.

Explore →

BWTS Retrofit Engineering

Ballast water treatment integration from 3D scan to class approval.

Explore →

Stability Booklet Services

Intact and damage stability, inclining experiments and loadicator data.

Explore →

3D Laser Scanning

FARO scanning and as-built models for retrofit design and missing drawings.

Explore →

Helideck Design

Structural design and FEM to CAP 437, with stability and class approval.

Explore →

Naval Architecture

From concept to class-ready documentation—complete hydrostatics, stability, and tonnage for newbuilds and conversions.

Request a quote for this category →

Basic Design & NA Services

Early-stage design packs aligning concept, rules, and performance.

New Build Vessel Design

End-to-end GA, lines, and rule checks tailored to mission profile.

Yachts & Special Vessels—Concept + Detailed

Owner styling with class compliance and buildability.

Specialized Engineering (Yachts/Houseboats/Custom)

Weight, systems, and habitability balanced for comfort.

Hydrodynamics Calculations

Resistance/propulsive estimates to size power and optimize speed.

CFD Analysis

Flow simulations to refine hull/appendages and reduce drag.

Intact Stability

Criteria assessment and loading condition checks.

Damage Stability (Deterministic/Probabilistic)

Failure scenarios, survivability, and compliance proofs.

Freeboard Calculations

Assignment per conventions for reserve buoyancy and safety.

Tonnage Calculations

GT/NT determination with supporting drawings.

Midship Section Design

Section modulus, shear area, and local details per rules.

Inclining Experiment & Calculations

Lightship weight/VCG derivation with full report.

Lightship Survey & Heel Test

Onboard verification for small craft and workboats.

Sea Trial Experiment & Report

Speed/consumption tracking and performance acceptance.

Loading Software Development

Class-ready loadicator tailored to your vessel.

Vessel Hull Lines Preparation

Fair hullforms, offsets, and deliverables for production.

Structural Engineering

Rule-based scantlings plus FEA/DSA for strength, fatigue, buckling, vibration, deck loads, and offshore lifts.

Request a quote for this category →

Structural Drawings

Production-ready plans with welds, joints, and details.

Scantling Calculations

Rule compliance for plating, stiffeners, and primary members.

Hull Structural Design

Global girdering and local structure layout for strength.

Foundation Design

Equipment foundations with load paths and chocking details.

FEA (Finite Element Analysis)

Stress/deflection hotspots and reinforcement guidance.

Direct Strength Analysis

First-principles assessment beyond prescriptive rules.

Beam Analysis

Simplified checks for masts, ramps, and substructures.

Fatigue Analysis

Life estimates under wave and operational spectra.

Buckling Analysis

Plate and column stability including openings and cutouts.

Vibration Analysis

Natural frequencies and mitigation of resonance risks.

Dynamic Analysis

Time-history/response evaluation for transients.

Deck Strength Analysis

Heavy lifts, containers, and concentrated loads.

Onshore Steel Structures—Strength

Pipe racks, skids, platforms with marine context.

Scrubber Deckhouse Design

Stacks, casings, and reinforcements for retrofits.

Lifting Design & Analysis

Pads, points, spreaders, and rigging checks.

Offshore Units—Lifting Analysis

Heavy modules and sea fastening verifications.

Mooring & Sea Fastening

Transport tie-downs, grillages, and voyage loads.

Offshore Structural Engineering

Subsea/skid frames and topside structural solutions.

Tanker→Chemical Carrier—Thermal Boiler Integration

Structural adaptations for heating systems.

Detailed Structural Engineering

Full MTOs, details, and class close-outs.

Piping Engineering

P&IDs to 3D models with stress, water hammer, HVAC, dual-fuel, BWTS, scrubbers, decarbonization, and site support.

Request a quote for this category →

P&IDs

Functional diagrams capturing control and safety philosophy.

Valve/Material Specs

Service matrices and datasheets per standards.

Machinery Calculations

Pumps, NPSH, sizing, and selections.

Piping Calculations

Flow, pressure drop, and thermal expansion allowances.

Marine Piping & Machinery Consulting

Troubleshooting and optimization on fleet issues.

Pipe Stress Analysis

GRE, exhaust, and steel systems with restraint design.

Water Hammer Analysis

Transient surge assessment and protection devices.

Steady/Transient Analysis

Operating envelopes across modes and failures.

HVAC Complete Design

Comfort, machinery, and ventilation compliance.

Ducting & Instrumentation Diagram

System logic and controls for HVAC.

HVAC Equipment Sizing

Heat loads, coils, fans, and filtration selections.

Heat Load Calculations

Envelope, occupancy, and machinery heat balance.

New Builds & Retrofits—Basic Design

Packaged deliverables for shipyards.

Dual Fuel Conversion

Fuel trains, purge, safety, and integration.

3D Piping Modelling

Clash-free routings with supports and spools.

Production/Installation Drawings

Isometrics, spools, and weld maps.

Material Takeoff

Accurate BOQs tied to model and P&IDs.

Support Drawings

Hangers, guides, and spring supports.

Marine Utility Systems

Bilge, ballast, FW, SW, sanitary, and more.

Workboat & Tug Piping

Compact layouts for maintainability.

Retrofit Feasibility Studies

3D scan-based routing strategies.

Tank Conversion Designs

Cargo/service changes with heating and coating.

BWTS Integration

Layout, structural, electrical and commissioning support.

Scrubber Systems

SOx compliance retrofits with deckhouse integration.

Decarbonization Solutions

ESDs, fuel changes, and power optimization.

Engine & Genset Replacements

Uprate or swap with minimal downtime.

Site Supervision & Support

Yard support to close open points swiftly.

Electrical Engineering

Load analyses, SLDs, lighting, FDAS, navigation lights, cable schedules, as-built packs, and energy-saving studies.

Request a quote for this category →

Electrical Drawings (Boats/Yachts/Ships)

Layouts, schematics, interlocks, and panels.

Equipment Selection

Generators, batteries, cables sized to class.

Load Analysis & SLD

Balanced distribution with discrimination.

BWTS Commissioning/Testing

PACT Marine UV systems on-board support.

Fire Detection & Safety Systems

FDAS layouts and integration.

Internal Comms & Nav Lights

Alarms, PA/GA, and COLREG-compliant lights.

Main & Emergency Lighting

Zoning, redundancy, and escape route lighting.

Lux Survey & Calculations

Measured compliance against targets.

Lighting/Nav Light Layouts + Cable Schedules

Install-ready documentation.

As-Built Electrical Drawings

Post-survey redlines into final CAD.

Coordination with Work Teams

Smooth handovers and query resolution.

Complete System Studies

Power quality, harmonics, and loss reduction.

Install Planning & Supervision

Standards-compliant execution on board.

Energy Efficiency

EEXI technical files, EPL, CFD-backed assessments, and ESD retrofits to cut fuel burn and emissions.

Request a quote for this category →

EEXI Calculations

Attained vs required EEXI with evidence.

EEXI Technical File & Class

Submission pack and approvals coordination.

Engine Power Limitation (EPL)

Procedures, seals, and recordings.

CFD for EEXI

Performance proof for speed-power curves.

ESD Retrofits

Devices and integrations with ROI analysis.

Survey & Scanning

FARO 3D scanning, on/off-hire, bunker, draft, cargo surveys, and costed repair assessments.

Request a quote for this category →

3D FARO Scanning

High-accuracy point clouds for tight spaces.

Scan Registration/Processing

Clean, aligned clouds for modelling.

Engine/Pump Room Scans (BWTS/Scrubbers)

Retrofit-ready datasets.

On-Hire / Off-Hire Surveys

Condition baselines and claims protection.

Bunker Surveys

ROB verification and reconciliation.

Draft Surveys

Cargo weight by displacement method.

Loading/Offloading Surveys

Quantity, damage, and handling checks.

General Condition Surveys

Hull, deck, and machinery condition.

Repair Cost Estimation

Scope definition with man-hour/material takeoffs.

Vessel Hull Lines Preparation

Lines from offsets/scans for records.

As-Built Engineering

Turn survey redlines into fabrication drawings and retrofit documentation with feasibility notes.

Request a quote for this category →

Detailed Retrofit Engineering

Drawings and lists aligned to shipyard practice.

As-Built Drawings from Site

Measured updates captured accurately.

Retrofit/Modification Docs

Method statements and integration notes.

Feasibility & Site Survey Reports

Risk, access, and install planning.

Statutory, Compliance & Class Approvals

We coordinate with Flag/RO and class—from GCC code submissions to thermal boiler conversion files.

Request a quote for this category →

Project Management for Statutory

Schedules, trackers, and submissions.

GCC Code Compliance Docs

Regional code alignment and evidence.

Class Approvals (multiple societies)

BV, RINA, CCS, PRS, Tasneef, etc.

Yacht Surveys & Inspections

Compliance checks for private/commercial.

Thermal Boiler Installation Docs

Tanker→chemical conversion documentation.